MODULES MAZDA

Module for reprogramming ECU cars Mazda ECU Denso, Melco produced before 2010 year

Support MCU:
SH7055, SH7058, MH8405F, MH8406F, MH8305F

Functions:
Read - Write ECU by CAN BUS
Read - Write ECU by K-Line
Automatic checksum correction
ECU recovery from any state by K-line

Approximate list of cars:
Mazda 3, 6, CX7, MX5, RX8 и т.д.




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU cars Mazda ECU Melco MCU M32r MH8106F

Functions:
Read - Write ECU by CAN BUS
Read - Write ECU by K-Line
Automatic checksum correction
ECU recovery from any state by K-line

Approximate list of cars:
Mazda 3, 6, CX7, MX5, RX8 and so on




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU cars Mazda, Nissan Lafesta ECU Melco MCU MH8110F

Functions:
Read - Write ECU by CAN BUS
Automatic checksum correction

Approximate list of cars:
Mazda 3, 6, CX7 and so on
Nissan Lafesta




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU cars Mazda ECU M799G MCU MPC5XXX

Mazda ECM M799G Mazda CX9 MCU MPC5XXX

Functions:
Read - Write ECU by CAN BUS
Automatic checksum correction




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU cars Mazda ECU Denso MCU R4F70580S, HD64F7058F produced 2009-2013 years

Functions:
Read - Write ECU by CAN BUS
Automatic checksum correction

List of cars:
Mazda 3 Denso 1.6 BL АКПП MCU R4F70580S 2009 - 2013 and so on
Mazda 3 Denso 1.6 BL МКПП MCU HD64F7058F 2009 - 2013 and so on
Mazda 2 1.5 NA R4F70580S 2009 - 2013 and so on




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU cars Mazda Diesel ECU Denso

Support MCU:
SH7059, SH7058

Functions:
Read - Write ECU by CAN BUS
Automatic checksum correction

Approximate list of cars:
Mazda CX7 Diesel Denso MCU SH7059
Mazda Bongo Diesel Denso MCU SH7058
Mazda Diesel Denso MCU SH7058 QFP-256
Mazda Diesel Denso MCU SH7058 BGA
Mazda3, Mazd6, Mazda5, Bongo and so on




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU cars Mazda RX8 R4F70580S produced 2009-2013 years

Mazda RX8 R4F70580S and so on 2008 - 2013 and so on

Functions:
Read - Write ECU by CAN BUS
Automatic checksum correction





ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU cars Mazda GEN1 SkyActiv-G MELCO, DENSO, SkyActiv-D DENSO produced after 2012 years


Support MCU:
R5F72543

Functions:
Read - Write ECU by CAN BUS
Automatic checksum correction

Mazda 3 2.0 NA R5F72543
Mazda 3 2.2 NA R5F72543
Mazda 3 2.5 NA R5F72543
Mazda 6 2.0 NA R5F72543
Mazda 6 2.2 NA R5F72543
Mazda 6 2.5 NA R5F72543
Mazda CX5 2.0 NA R5F72543
Mazda CX5 2.2 NA R5F72543
Mazda CX5 2.5 NA R5F72543




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU cars Mazda GEN2 SkyActiv-G FaceLift CRYPTO MELCO, DENSO, SkyActiv-D FaceLift CRYPTO DENSO

Support MCU:
R5F72546, R5F72543

Functions:
Read - Write ECU by CAN BUS
Automatic checksum correction

Mazda 2 1.5 NA R5F72546
Mazda 3 1.5 NA R5F72546
Mazda 6 2.0 NA R5F72546
Mazda 3 1.6 NA R5F72531
Mazda 3 1.5 NA R5F72543
Mazda 3 2.0 NA R5F72543
Mazda 3 2.5 NA R5F72543
Mazda 6 2.0 NA R5F72543
Mazda 6 2.5 NA R5F72543
Mazda CX5 2.0 NA R5F72543
Mazda CX5 2.5 NA R5F72543
Mazda MX5 Miata 2.0 NA R5F72543
Mazda CX9 2.5 NA R5F72543




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU cars Mazda GEN3 SkyActiv 1N83M MPC5746R produced with 2017 year


Mazda SkyActiv-G FaceLift CRYPTO MELCO CAN BUS with 2017 year
Mazda SkyActiv-G FaceLift CRYPTO DENSO CAN BUS with 2017 year

Support MCU:
1N83M MPC5746R

Functions:
Read - Write ECU by CAN BUS
Automatic checksum correction

Mazda 3 2.0 NA NXP Semiconductors SC667456MMT5
Mazda 3 2.5 NA NXP Semiconductors SC667456MMT5
Mazda 6 2.0 NA NXP Semiconductors SC667456MMT5
Mazda 6 2.5 NA NXP Semiconductors SC667456MMT5
Mazda CX5 2.0 NA NXP Semiconductors SC667456MMT5
Mazda CX5 2.5 NA NXP Semiconductors SC667456MMT5




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.