MODULES VAZ, UAZ, GAZ

Module for reprogramming ECU VAZ M74.8/M74.8+/M74.9/M86/M74M ITELMA CAN BUS

VAZ M74.8 CPU STM SPC58VQ series, SPC5844
Functions:
Reading FULL FLASH
Writing Program + Calibration
Reading and Writing EEPROM
Reading and Writing CONFIG
Identification
Checksum Correction
Reading and Clearing Errors

VAZ M74.8+ CPU STM SPC58VQ series, SPC5842
Functions:
Reading FULL FLASH
Writing Program + Calibration
Reading and Writing EEPROM
Reading and Writing CONFIG
Identification
Checksum Correction
Reading and Clearing Errors

VAZ M74.9 CPU Artery series AT32F4xx AT32F410F
Functions:
Reading FULL FLASH
Writing Program + Calibration
Reading and Writing EEPROM
Reading and Writing CONFIG
Identification
Checksum Correction
Reading and Clearing Errors

VAZ M74M CPU SAK-XC2768X, SAK-XC2060M
Functions:
Reading FLASH (no) - only possible with a BSL module (BSL mode is not included with this module).
Writing Program + Calibration.
Reading EEPROM (no) - only possible with a BSL module (BSL mode is not included with this module).
EEPROM Write
Identification
Checksum Correction
Reading and Clearing Errors

VAZ/UAZ M86 CPU XC2768X
Functions:
Reading FLASH (no) - only possible with a BSL module (BSL mode is not included with this module).
Writing Program + Calibration.
Reading EEPROM (no) - only possible with a BSL module (BSL mode is not included with this module).
EEPROM Write
Identification
Checksum Correction
Reading and Clearing Errors




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU VAZ, UAZ Bosch M(E)17.9.71

VAZ, UAZ Bosch M(E)17.9.71 CPU TriCore TC1724 OBD
Functions:
ECU reading and writing via CAN BUS
Unlocking the unit in BSL mode
Unlocking the unit in OBD2 mode



ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU UAZ AECS

UAZ Module AECS CAN BUS NEW

UAZ Patriot/Pickup/Bukhanka MCU SPC5634 ЭБУ AECS.
Read FULL FLASH
Write (CAL + SOFT) FLASH
Identification
Checksum Correction
Reading and Clearing Errors


China Module DELPHI MT62.3 CAN BUS NEW

Exeed, Chery and others with ECU Delphi MT62.3 MCU SPC5740.
The module work on two protocols (CAN BUS и CANFD).

Functions available by the protocol CAN BUS:
Read FULL FLASH
Write (CAL + SOFT) FLASH
Read EEPROM
Write EEPROM

->

China Module DELPHI MT62.3 CANFD BUS NEW

Functions available by the protocol CANFD BUS:
Read FULL FLASH (Read FULL FLASH by CAN BUS only)
Write (CAL + SOFT) FLASH
Read EEPROM (Write EEPROM by CAN BUS only)
Identification
VIN Code Change
Checksum Correction
Reading and Clearing Errors

China Module DELPHI MT62.1/MT22.X (CAN BUS and K-LINE) NEW

Moskvich 3, Sehol, Jac, Dongfeng, Geely, Lifan and others with ЭБУ Delphi MT62.1, MT22.x MCU SPC5634.
The module work on two protocols (CAN BUS и K-LINE)
Read FULL FLASH
Write (CAL + SOFT) FLASH
Identification
Checksum Correction
Reading and Clearing Errors





ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogpamming ECU UAZ ECU BOSCH EDC16C39

UAZ (with Iveco engine) ECU BOSCH EDC16C39 (test)
Iveco c ecu BOSCH EDC16C39

Functions:
Read - Write Flash ecu by K-LINE

UAZ (with ZMZ engine) ECU BOSCH EDC16C39 (test)


Functions:
Write Flash ecu by K-LINE



ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.