MODULES VAG

Module for reprogramming ECU VAG Delphi DCM6.2

VAG c ЭБУ Delphi DCM6.2 CPU NXP SPC5674
Functions:
FULL FLASH reading (NOT VIRTUAL READING!!!)
FLASH writing (CAL + SOFT) (Automatic detection of the firmware being written)
SHADOW FLASH reading (Reading the processor password - with this password, you can clone the unit)
Identification
Checksum correction + digital signature patch (RSA)
Reading and erasing errors




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU Volkswagen, Skoda, Seat, Audi, and VAG vehicles.

Volkswagen, Skoda, Seat, Audi, and VAG vehicles, Delphi DCM3.7 MCU SH72543 ECU.
Functions: reading, writing, checksum correction, RSA patch.
Volkswagen, Skoda, Seat, Audi, VAG, SIMOS 7.1, SIMOS 7.1A, SIMOS 9.1 ECUs (flash AM29F400)
Functions: read, write calibrations by K-Line
Volkswagen, Skoda, Seat, Audi, VAG, SIMOS 3, SIMOS 3.2, SIMOS 3.2A, SIMOS 3PC, SIMOS 3PD, SIMOS 3PB, SIMOS 3PE, SIMOS 3PCA, SIMOS 3PA, SIMOS 3PG, SIMOS 3.3A, SIMOS 3.4, SIMOS 3.4A ECUs
Functions: read, write calibrations by K-Line
Volkswagen, Skoda, Seat, Audi, VAG, SIMOS 7PP, SIMOS 7XX ECUs (flash AM29F800)
Functions: read, write by K-Line (TEST)
Volkswagen, Skoda, Seat, Audi Magneti Marelli IAW 4LV flash AM29F400
Functions: reading, writing by K-Line
Volkswagen, Skoda, Seat, Audi Magneti Marelli IAW 4HV CPU ST10F296
Functions: reading, writing by K-Line (TEST)
Volkswagen, Skoda, Seat, Audi Magneti Marelli IAW 4MV flash AM29F400
Functions: reading, writing by K-Line
Volkswagen Golf, Polo, Jetta, Skoda Fabia, Rapid, Roomster Magneti Marelli IAW 7GV CPU SAK-XC2785X
Functions: reading, writing by K-Line




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU Volkswagen, Skoda, Seat, Audi, and VAG ECU Siemens SIMOS
Siemens SIMOS PPD1.1, PPD1.2, PPD1.3, PPD1.5 MPC561 ECU
Functions: reading,writing by K-Line
Siemens SIMOS PPD1.1, PPD1.2, PPD1.3, PPD1.5 MPC561 ECU
Functions: reading,writing by CAN BUS TP2.0
Siemens SIMOS 6 MPC561 ECU
Functions: reading,writing by CAN BUS TP2.0
SIMOS PCR2.1 Tricore TC1796 ECU
Functions: reading,writing by CAN bus (Test)




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.

Module for reprogramming ECU Volkswagen, Skoda, Seat, Audi, and VAG BOSCH MED17-EDC17
BOSCH MED17-EDC17 UDS CAN BUS
Functions: ECU writing, checksum correction. (TEST)
BOSCH MED17-EDC17 TP2.0 CAN BUS
Functions: ECU writing, checksum correction. (TEST)




ECUFLASH TOOL is a program designed for working with electronic units in Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus, Citroen/Peugeot, and other vehicles.

To work with the Program, you need a J2534 adapter, such as OpenPort 2.0, Mongoose, CarDaq, Scanmatic 2, Scanmatic 3, Chipsoft.

The software is delivered modularly. A SenseLock key is used to protect the software. If you don't have a USB key, you must purchase USB key, as the module will not function without one. If you have a USB key, please enter USB key number when placing your order.